Details
BPO METRO ACCESS CHAMBER 30x30 KIT x 99cm HEIGHT
- Panels are injection moulded in 100% recycled Polypropylene
- Panels are easy to assemble, and designed to interlock at the corners with an integrated mortice and tenon taper lock system - BPO chamber is supplied pre-assembled.
- The external wall is patterned such that a concrete surround will flow into voids, adding to the structural strength of the system.
- Panels are 330mm deep, with interlocking features which allow for 3 boxes to be easily stacked to create a chamber which is 1m in depth. This Kit is 3 boxes and 1 Cover so totals 990mm deep.
- Wide internal flange within the chamber enables covers and frames to fit straight onto the box, therefore direct loading is transferred evenly.
- Panels have trepanned holes which take electricity and utility duct sizes from 63mm to 160mm.
- Chambers are versatile and suitable for most ducting applications.
- System is approved for use by many Local Authorities and Utility Sectors.
Specification
- Chamber size is 330mm x 300mm x 330mm high.
- Chambers are able to be stacked 1, 2 or 3 units high. (N.B. This KIT is THREE units deep- please see our other pre-assembled kits).
- Chambers have pre-trepanned cut out areas to accept 63mm, 110mm, 120mm and 160mm diameter duct (adapters for 178mm duct are available on request).
- The installed chamber shall have a C15/ST3 concrete base and surround, 150mm surround and 150mm base bedded on a 100mm Type 1 sub-base or concrete slab with a 50mm drain hole (base to be constructed first and have a smooth finish).
- Installed chambers meet the Highway Regulations of minimum duct cover in both footways and road verges.
- The frame must be supported on the concrete surround of the chamber on a bed of mortar.
- The cover and frame will meet the loading requirements of BS EN124 Class B125.
- All quality systems and inspection procedures comply with BS EN ISO 9001: 2008 (Certificate No: FM 01420).